Views:5 Author:http://www.insulatingtube.com/ Publish Time: 2019-11-21 Origin:Site
What is the glass fiber tube winding tube made of?
We have seen products such as glass fiber tube winding tube, epoxy tube, fiber reinforced winding tube, winding tube and other insulating sleeve products. They all have the same equipment in the manufacturing process, which is the glass fiber tube winding forming machine. It is also the first step in the manufacture of a fiberglass tube wound tube. So how much do you know how he works?
Zhejiang Yingtai Insulation Materials Co., Ltd. and everyone share what is the fiberglass tube winding machine and its manufacturing process:
The fiberglass tube winding forming machine is a mechanical device that winds glass fibers around a fiber tube and then dries them. Existing fiberglass tube winding forming machines include fiber tubes, clamping devices, and drying devices.
1. The fiber tube comprises a fiber rod, and a copper piece is fixed at each end of the fiber rod; before the fiber tube is placed on the clamping device for fiber winding, an iron sleeve needs to be inserted at both ends of the fiber tube to prevent the fiber from being wound around the copper piece. . There are the following disadvantages: in order to prevent the fiber tube from slipping when winding the fiber, the iron sleeve and the fiber tube are tightly matched at both ends, and the iron sleeve is required to be knocked on both ends of the fiber tube by a hard object such as a hammer, and the installation is time-consuming and laborious. After the fiber tube is wound with the fiber, the iron sleeve needs to be removed, and the iron sleeve is knocked down from both ends of the fiber tube by a hard object such as a taro, which is troublesome to be disassembled, and may even damage the fiber tube.
2. The fiber tube of the iron sleeve is clamped on the clamping device. The existing clamping device includes a three-jaw chuck (a clamping mechanism commonly used on machine tools), and one end of the fiber tube is inserted into the chuck port. Then, the three-claw clamping fiber tube is manually rotated, and the disassembly and assembly is inconvenient, and the clamping force is limited; only one end is fixed, and when the fiber is wound, the fiber tube is subjected to a pulling force from the fiber, which easily causes the fiber tube to have a certain degree of inclination. , affecting the quality of the winding.